aguiar | CTAC

Export 234 results:

Papers in International Journals (112)

Matos A. M., Figueiredo S. C., Nunes S., Schlangen E., and Aguiar, J. B., "Durability of an UHPFRC under mechanical and chloride loads", Construction and Building Materials, vol. 311 , doi:10.1016/j.conbuildmat.2021.125223, 2021.

Year: 2020 | JCR: Q1 | SJR: Q1

Cunha S., Silva M., and Aguiar, J. B., "Argamassas com incorporação direta de Materiais de Mudança de Fase: Avaliação do comportamento a baixas e elevadas temperaturas", Revista Matéria - Rio de Janeiro, vol. 26, issue 3, pp. 13010, doi:10.1590/S1517-707620210003.13010, 2021.

Year: 2019 | JCR: Q4 | SJR: Q4

Matos A. M., Nunes S., Costa C., and Aguiar, J. B., "Durability of an UHPC containing spent equilibrium catalyst", Construction and Building Materials, vol. 305, doi:10.1016/j.conbuildmat.2021.124681, 2021.

Year: 2020 | JCR: Q1 | SJR: Q1

Abdelli H. E., Mokrani L., Kennouche S., and Aguiar, J. B., "Mechanical and durability properties of concrete incorporating glass and plastic waste", Advances in Concrete Construction, vol. 11, issue 2, pp. 173 - 181, doi:10.12989/acc.2021.11.2.173, 2021.

Kheradmand M., Azenha M., Vicente R., and Aguiar, J. B., "An innovative approach for temperature control of massive concrete structures at early ages based on post-cooling: Proof of concept", Journal of Building Engineering, vol. 32, doi:10.1016/j.jobe.2020.101832, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Frigione M., and Aguiar, J. B., "Innovative materials for construction", Materials , vol. 13, doi:10.3390/ma13235448, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Abdelli H. E., Mokrani L., Kennouche S., and Aguiar, J. B., "Utilization of waste glass in the improvement of concrete performance: A mini review", Waste Management & Research , vol. 38, issue 11, pp. 1204 - 1213, doi:10.1177/0734242X20941090, 2020.

Beldjilali S., Bougara A., Aguiar, J. B., Bouhamou N., and Dabbebi R., "Properties of a new material based on a gypsum matrix incorporating waste brick", Construction and Building Materials, vol. 259 , doi:10.1016/j.conbuildmat.2020.120416, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Jerónimo A., Soares C., Aguiar, J. B., and Lima N., "Hydraulic lime mortars incorporating micro cork granules with antifungal properties", Construction and Building Materials , vol. 255, doi:10.1016/j.conbuildmat.2020.119368, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Medine M., Trouzine H., Aguiar, J. B., and Djadoun H., "Life cycle assessment of concrete incorporating scrap tire rubber: comparative study", Revue Nature et Technologie, vol. 12, issue 2, pp. 1 - 11, 2020.

Year: 2020 | JCR: SQ | SJR: SQ

Sarcinella A., Aguiar, J. B., Lettieri M., Cunha S., Frigione M., and , "Thermal performance of mortars based on different binders and containing a novel sustainable phase change material (PCM)", Materials, vol. 13, doi:10.3390/ma13092055, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Cunha S., Leite P., and Aguiar, J. B., "Characterization of innovative mortars with direct incorporation of phase change materials", Journal of Energy Storage, vol. 30, doi:10.1016/j.est.2020.101439, 2020.

Year: 2020 | JCR: Q2 | SJR: Q1

Cunha S., and Aguiar, J. B., "Phase change materials and energy efficiency of buildings: A review of knowledge", Journal of Energy Storage, vol. 27, doi:10.1016/j.est.2019.101083, 2020.

Year: 2020 | JCR: Q2 | SJR: Q1

Dabbebi R., Aguiar, J. B., and s. Baklouti, "Spectroscopic and microscopic study of alkali activated mortars based on Tunisian phosphate washing waste", Cement and Concrete Composites, vol. 105, doi:10.1016/j.cemconcomp.2019.103449, 2020.

Year: 2019 | JCR: Q1 | SJR: Q1

Frigione M., Lettieri M., Sarcinella A., and Aguiar, J. B., "Sustainable polymer-based Phase Change Materials for energy efficiency in buildings and their application in aerial lime mortars", Construction and Building Materials, vol. 231, doi:10.1016/j.conbuildmat.2019.117149, 2020.

Year: 2020 | JCR: Q1 | SJR: Q1

Frigione M., Lettieri M., Sarcinella A., and Aguiar, J. B., "Applications of Sustainable Polymer-Based Phase Change Materials in Mortars Composed by Diferent Binders", Materials, issue 12, doi:10.3390/ma12213502, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Kheradmand M., Vicente R., Azenha M., and Aguiar, J. B., "Influence of the incorporation of phase change materials on temperature development in mortar at early ages: Experiments and numerical simulation", Construction and Building Materials, vol. 225, pp. 1036 - 1051, doi:10.1016/j.conbuildmat.2019.08.028, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Lucas S. S., and Aguiar, J. B., "Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders", Heat and Mass Transfer, vol. 55, issue 9, pp. 2429 - 2435, doi:10.1007/s00231-019-02594-1, 2019.

Year: 2019 | JCR: Q3 | SJR: Q1

Dabbebi R., Aguiar, J. B., Samet B., and s. Baklouti, "Mineralogical and chemical investigation of Tunisian phosphate washing waste during calcination", Journal of Thermal Analysis and Calorimetry, vol. 137, pp. 1827 - 1840, doi:10.1007/s10973-019-08057-3, 2019.

Year: 2019 | JCR: Q2 | SJR: Q2

Cunha S., and Aguiar, J. B., "Behavior of cementitious mortars with direct incorporation of non-encapsulated phase change material after severe temperature exposure", Construction and Building Materials , vol. 230, pp. 117011, doi:10.1016/j.conbuildmat.2019.117011, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Matos A. M., Nunes S., Costa C., and Aguiar, J. B., "Spent equilibrium catalyst as internal curing agent in UHPFRC", Cement and Concrete Composites, vol. 104, doi:10.1016/j.cemconcomp.2019.103362, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Argamassas eco-eficientes com incorporação simultânea de material de mudança de fase e cinzas volantes", Matéria - Rio de Janeiro, vol. 24, doi:10.1590/S1517-707620190002.0682, 2019.

Year: 2019 | JCR: Q4 | SJR: Q4

Matos A. M., Nunes S., and Aguiar, J. B., "Capillary transport of water in cracked and non-cracked UHPFRC specimens", Journal of Advanced Concrete Technology, vol. 17, pp. 244-259, doi:10.3151/jact.17.5.244, 2019.

Year: 2019 | JCR: Q3 | SJR: Q2

Teixeira E. R., Camões A., Branco F. G., Aguiar, J. B., and Fangueiro R., "Recycling of biomass and coal fly ash as cement replacement material and its effect on hydration and carbonation of concrete", Waste Management 2019, vol. 94, pp. 39 - 48, doi:10.1016/j.wasman.2019.05.044, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Jerónimo A., Camões A., Aguiar, J. B., and Lima N., "Hydraulic lime mortars with antifungal properties", Applied Surface Science, vol. 483, pp. 1192-1198, doi:10.1016/j.apsusc.2019.03.156, 2019.

Year: 2019 | JCR: Q1 | SJR: Q1

Ramdania S., Guettala A., Benmalek M. L., and Aguiar, J. B., "Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder", Journal of Building Engineering, vol. 21, pp. 302-311, doi:10.1016/j.jobe.2018.11.003, 2019.

Year: 2019 | JCR: Q2 | SJR: Q1

Senani M., Ferhoune N., Guettala A., and Aguiar, J. B., "Eco-concrete with incorporation of blast furnace slag as natural aggregates replacement", Science and Technology of Materials, vol. 30, issue 3, pp. 144-150, doi:10.1016/j.stmat.2017.12.001, 2018.

Year: 2018 | JCR: SQ | SJR: Q3

Dabbebi R., s. Baklouti, Aguiar, J. B., Pacheco-Torgal, F., and Samet B., "Investigations of geopolymeric mixtures based on phosphate washing waste", Science and Technology of Materials, vol. 30, pp. 1-5, doi:10.1016/j.stmat.2018.08.001, 2018.

Year: 2018 | JCR: SQ | SJR: Q3

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Classificação de argamassas com incorporação de materiais de mudança de fase com base nas suas propriedades físicas, mecânicas e térmicas", Revista Matéria - Rio de Janeiro, vol. 23, issue 3, pp. 1-20, doi:10.1590/S1517-707620180003.0541, 2018.

Year: 2018 | JCR: Q4 | SJR: Q3

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Reabilitação térmica: Contributo das argamassas com incorporação de material de mudança de fase", Revista Matéria - Rio de Janeiro, vol. 23, issue 3, pp. 1-12, doi:10.1590/S1517-707620180003.0542, 2018.

Year: 2018 | JCR: Q4 | SJR: Q3

Dabbebi R., Aguiar, J. B., Camões A., Samet B., and s. Baklouti, "Effect of the calcinations temperatures of phosphate washing waste on the structural and mechanical properties of geopolymeric mortar", Construction and Building Materials, vol. 185, pp. 489 - 498, doi:10.1016/j.conbuildmat.2018.07.045, 2018.

Year: 2018 | JCR: Q1 | SJR: Q1

Kheradmand M., Azenha M., Gomes C. J. P., and Aguiar, J. B., "Energy benefits of cement-based plaster containing hybrid phase-change material", Proceedings of the Institution of Civil Engineers - Construction Materials, vol. 171, issue 3, pp. 117-125, doi:10.1680/jcoma.17.00027, 2018.

Year: 2018 | JCR: SQ | SJR: Q2

Cunha S., Aguiar, J. B., and Ferreira V. M., "Eco-efficient mortars with incorporation of phase change materials", Journal of Building Physics, vol. 41, issue 5, pp. 469-492, doi:10.1177/1744259117697397, 2018.

Year: 2018 | JCR: Q3 | SJR: Q2

Medine M., Trouzine H., Aguiar, J. B., and Asroun A., "Durability properties of five years aged lightweight concretes containing rubber aggregates", Periodica Polytechnica Civil Engineering, vol. 62, issue 2, pp. 386-397, doi:10.3311/PPci.11363, 2018.

Year: 2018 | JCR: Q3 | SJR: Q3

Lucas S. S., and Aguiar, J. B., "Multifunctional wall coating combining photocatalysis, self-cleaning and latent heat storage", Materials Research Express, vol. 5, issue 2, pp. 1-13, doi:10.1088/2053-1591/aaa82f, 2018.

Year: 2018 | JCR: Q3 | SJR: Q2

Avrami D., Ungureanu D., Angelescu N., and Aguiar, J. B., "A comparative study on the properties of potentially bioactive glasses obtained by sol-gel technique and by melting mixtures of oxides", The Scientific Bulletin of Valahia University – Materials and Mechanics, vol. 15, pp. 18-24, doi:10.1515/bsmm-2017-0013, 2017.

Tahri W., Abdollahnejad Z., Mendes J., Pacheco-Torgal, F., and Aguiar, J. B., "Cost efficiency and resistance to chemical attack of a fly ash geopolymeric mortar versus epoxy resin and acrylic paint coatings", European Journal of Environmental and Civil Engineering, vol. 21, issue 5, pp. 555-571, doi:10.1080/19648189.2015.1134674, 2017.

Year: 2017 | JCR: Q3 | SJR: Q2

Abdollahnejad Z., Miraldo S., Pacheco-Torgal, F., and Aguiar, J. B., "Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications", European Journal of Environmental and Civil Engineering, vol. 21, issue 4, pp. 412-429, doi:10.1080/19648189.2015.1125392, 2017.

Year: 2017 | JCR: Q3 | SJR: Q2

Cunha S., Aguiar, J. B., and Ferreira V. M., "Durability of mortars with incorporation of phase change materials microcapsules", Romanian Journal of Materials, vol. 47, issue 2, pp. 166-175, 2017.

Year: 2017 | JCR: Q4 | SJR: Q3

Cunha S., Aguiar, J. B., and Tadeu A., "Comportamento térmico de argamassas com incorporação de Materiais de Mudança de Fase (PCM) no clima português", Revista Matério - Rio de Janeiro, vol. 22, issue 4, doi:10.1590/S1517-707620170004.0223, 2017.

Year: 2017 | JCR: Q4 | SJR: Q3

Cunha S., Aguiar, J. B., and Ferreira V. M., "Mortars with incorporation of phase change materials for thermal rehabilitation", International Journal of Architectural Heritage, vol. 11, issue 3, pp. 339-348, doi:10.1080/15583058.2016.1222464, 2017.

Year: 2017 | JCR: Q3 | SJR: Q1

Ascensão G., Seabra M. P., Aguiar, J. B., and Labrincha J. A., "Red mud-based geopolymers with tailored alkali diffusion properties and pH buffering ability", Journal of Cleaner Production, vol. 148, pp. 23-30, doi:10.1016/j.jclepro.2017.01.150, 2017.

Year: 2017 | JCR: Q1 | SJR: Q1

Pangdaeng S., Sata V., Aguiar, J. B., Pacheco-Torgal, F., Chindaprasirt J., and Chindaprasirt P., "Bioactivity enhancement of calcined kaolin geopolymer with CaCl2 treatment", ScienceAsia, vol. 42, pp. 407-414, doi:10.2306/scienceasia1513-1874.2016.42.407, 2016.

Year: 2016 | JCR: Q4 | SJR: Q3

Tahri W., Abdollahnejad Z., Mendes J., Pacheco-Torgal, F., Aguiar, J. B., and Jesus C., "Mechanical performance of geopolymeric mortars based on tunisian calcined clay, fly ash and metakaolin", ALITinform, vol. 45, issue 6, pp. 60-67, 2016.

Angelescu N., Stanciu D., Aguiar, J. B., Abdelgader H. S., and Bratu V., "Role of superplasticizer additives upon hydration process of cement pastes", The Scientific Bulletin of Valahia University – Materials and Mechanics, vol. 11, pp. 23-26, 2016.

Cunha S., Lima M., and Aguiar, J. B., "Influence of adding phase change materials on the physical and mechanical properties of cement mortars", Construction and Building Materials, vol. 127, pp. 1-10, doi:10.1016/j.conbuildmat.2016.09.119, 2016.

Year: 2016 | JCR: Q1 | SJR: Q1

Angelescu N., Ion I. M., Stanciu D., Aguiar, J. B., Stoian E. V., and Bratu V., "Special concrete with polymers", The Scientific Bulletin of Valahia University – Materials and Mechanics, vol. 11, pp. 7-10, 2016.

Medine M., Trouzine H., and Aguiar, J. B., "Fresh state properties of concrete incorporating scrap tire rubber", Periodica Polytechnica Civil Engineering, vol. 60, issue 4, pp. 611-617, doi:10.3311/PPci.8727, 2016.

Year: 2016 | JCR: Q4 | SJR: Q3

Cunha S., Aguiar, J. B., and Tadeu A., "Thermal performance and cost analysis of mortars made with PCM and different binders", Construction and Building Materials, vol. 122, pp. 637–648, doi:10.1016/j.conbuildmat.2016.06.114, 2016.

Year: 2016 | JCR: Q1 | SJR: Q1

Tahri W., Samet B., Pacheco-Torgal, F., Aguiar, J. B., and s. Baklouti, "Produtos de hidratação em argamassas geopoliméricas à base de argila da Tunísia para reparação de estruturas de concreto", Revista Matéria, vol. 11693, pp. 218-231, 2016.

Year: 2016 | JCR: Q4 | SJR: Q4

Ding Y., Han Z., Zhang Y., and Aguiar, J. B., "Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure", Composite Structures, vol. 138, pp. 184-191, doi:10.1016/j.compstruct.2015.11.051, 2016.

Year: 2016 | JCR: Q1 | SJR: Q1

Kheradmand M., Azenha M., Aguiar, J. B., and Castro-Gomes J. P., "Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings", Energy, vol. 94, pp. 250-261, doi:10.1016/j.energy.2015.10.131, 2016.

Year: 2016 | JCR: Q1 | SJR: Q1

Martins T., Pacheco-Torgal, F., Miraldo S., Aguiar, J. B., and Jesus C., "An experimental investigation on nano-TiO2 and fly ash based high performance concrete", Indian Concrete Journal, 2016.

Year: 2016 | SJR: Q3

Shafie-khah M., Kheradmand M., Javadi S., Azenha M., Aguiar, J. B., Castro-Gomes J. P., Siano P., and Catalão J., "Optimal behavior of responsive residential demand considering hybrid phase change materials", Applied Energy, vol. 163, pp. 81-92, doi:10.1016/j.apenergy.2015.11.013, 2016.

Year: 2016 | JCR: Q1 | SJR: Q1

Ding Y., Huang Y., Zhang Y., Jalali S., and Aguiar, J. B., "Self-monitoring of freeze–thaw damage using triphasic electric conductive concrete", Construction and Building Materials, vol. 101, pp. 440-446, doi:10.1016/j.conbuildmat.2015.10.135, 2015.

Year: 2015 | JCR: Q1 | SJR: Q1

Cunha S., Aguiar, J. B., ZALEGOWSKI K., Garbacz A., Soares P., Azevedo J., Ferreira V. M., and Tadeu A., "Sustainable Mortars with Incorporation of Microencapsulated Phase Change Materials", Advanced Materials Research, vol. 1129, pp. 621-628, doi:10.4028/www.scientific.net/AMR.1129.621, 2015.

Year: 2015 | SJR: Q4

ZALEGOWSKI K., Garbacz A., Cunha S., and Aguiar, J. B., "Tensile Properties of Polymer Repair Materials - effect of test parameters", Advanced Materials Research, vol. 1129, pp. 445-452, doi:10.4028/www.scientific.net/AMR.1129.445, 2015.

Year: 2015 | SJR: Q4

Cunha S., Aguiar, J. B., and Tadeu A., "Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials", Materiales de Construcción, vol. 65, issue 320, pp. 1-15, doi:10.3989/mc.2015.07314 , 2015.

Year: 2015 | JCR: Q3 | SJR: Q2

Abdollahnejad Z., Pacheco-Torgal, F., and Aguiar, J. B., "Development of Foam One-Part Geopolymers with Enhanced Thermal Insulation Performance and Low Carbon Dioxide Emissions", Advanced Materials Research, vol. 1129, pp. 565-572, doi:10.4028/www.scientific.net/AMR.1129.565, 2015.

Year: 2015 | SJR: Q4

Tahri W., Abdollahnejad Z., Mendes J., Pacheco-Torgal, F., and Aguiar, J. B., "Performance of a Fly Ash Geopolymeric Mortar for Coating of Ordinary Portland Cement Concrete Exposed to Harsh Chemical Environments", Advanced Materials Research, vol. 1129, pp. 573-580, doi:10.4028/www.scientific.net/AMR.1129.573, 2015.

Year: 2015 | SJR: Q4

Cunha S., Aguiar, J. B., and Pacheco-Torgal, F., "Effect of temperature on mortars with incorporation of phase change materials", Construction and Building Materials, vol. 98, pp. 89-101, doi:10.1016/j.conbuildmat.2015.08.077, 2015.

Year: 2015 | JCR: Q1 | SJR: Q1

Kheradmand M., Castro-Gomes J. P., Azenha M., Silva P. D., Aguiar, J. B., and Zoorob S. E., "Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems", Construction and Building Materials, vol. 89, pp. 48-59, doi:10.1016/j.conbuildmat.2015.04.031, 2015.

Year: 2015 | JCR: Q1 | SJR: Q1

Pangdaeng S., Sata V., Aguiar, J. B., Pacheco-Torgal, F., and Chindaprasirt P., "Apatite formation on calcined kaolin–white Portland cement geopolymer", Materials Science and Engineering C, vol. 51, pp. 1-6, doi:10.1016/j.msec.2015.02.039, 2015.

Year: 2015 | JCR: Q2 | SJR: Q1

Pereira M. F. P., Aguiar, J. B., Camões A., and Lourenço P. B., "Influence of type of binder and sand on the characteristics of masonry mortars", Romanian Journal of Materials, vol. 45, issue 2, pp. 117-122, 2015.

Year: 2015 | JCR: Q3 | SJR: Q3

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Argamassas com incorporação de Materiais de Mudança de Fase (PCM): Caracterização física, mecânica e durabilidade", Revista Matéria, vol. 20, issue 1, pp. 245-261, doi:10.1590/S1517-707620150001.0025, 2015.

Year: 2015 | JCR: Q4 | SJR: Q3

Abdollahnejad Z., Pacheco-Torgal, F., Felix T., Tahri W., and Aguiar, J. B., "Mix design, properties and cost analysis of fly ash-based geopolymer foam", Construction and Building Materials, vol. 80, pp. 18-30, doi:10.1016/j.conbuildmat.2015.01.063, 2015.

Year: 2015 | JCR: Q1 | SJR: Q1

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Mortars based in different binders with incorporation of phase change materials: Physical and mechanical properties", European Journal of Environmental and Civil Engineering, pp. 1216-1233, doi:10.1080/19648189.2015.1008651, 2015.

Year: 2015 | JCR: Q3 | SJR: Q2

Abdollahnejad Z., Pacheco-Torgal, F., Aguiar, J. B., and Jesus C. M. G., "Durability performance of fly ash based one-part geopolymer mortars", Key Engineering Materials, vol. 634, pp. 113-120, doi:10.4028/www.scientific.net/KEM.634.113, 2015.

Year: 2015 | JCR: SQ | SJR: Q4

Aguiar, J. B., Cunha S., and Kheradmand M., "Mortars with Phase Change Materials: Contribute to Sustainable Construction ", Key Engeneering Materials, vol. 634, pp. 3-13, doi:10.4028/www.scientific.net/KEM.634.3, 2015.

Year: 2015 | JCR: SQ | SJR: Q3

Cunha S., Aguiar, J. B., Ferreira V. M., Tadeu A., and Garbacz A., "Mortars with phase change materials - Part I: Physical and mechanical characterization ", Key Engeneering Materials, vol. 634, pp. 22-32, doi:10.4028/www.scientific.net/KEM.634.22, 2015.

Year: 2015 | JCR: SQ | SJR: Q3

Cunha S., Aguiar, J. B., Ferreira V. M., Tadeu A., and Garbacz A., "Mortars with phase change materials - Part II: Durability evaluation ", Key Engeneering Materials, vol. 634, pp. 33-45, doi:10.4028/www.scientific.net/KEM.634.33, 2015.

Year: 2015 | JCR: SQ | SJR: Q3

Kheradmand M., Azenha M., Aguiar, J. B., and Krakowiak K. J., "Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials", Energy and Buildings, vol. 84, pp. 526-536, doi:10.1016/j.enbuild.2014.08.010, 2014.

Year: 2014 | JCR: Q1 | SJR: Q1

Abdollahnejad Z., Hlavacek H., Miraldo S., Pacheco-Torgal, F., and Aguiar, J. B., "Compressive Strength, Microstructure and Hydration Products of Hybrid Alkaline Cements", Materials Research, Associação Brasileira de Metalurgia e Materiais - ABM; Associação Brasileira de Cerâmica - ABC; and Associação Brasileira de Polímeros ABPol., doi:10.1590/S1516-14392014005000091, 2014.

Year: 2014 | JCR: Q4 | SJR: Q2

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Influence of the type of phase change materials microcapsules on the properties of lime-gypsum thermal mortars", Advanced Engineering Materials, vol. 16, issue 4, pp. 433-441, doi:10.1002/adem.201300278 , 2014.

Year: 2014 | JCR: Q2 | SJR: Q1

Kheradmand M., Aguiar, J. B., and Azenha M., "Estimation of the specific enthalpy–temperature functions for plastering mortars containing hybrid mixes of phase change materials", International Journal Energy Environmental Engineering, vol. 5, pp. 1-7, doi:10.1007/s40095-014-0081-9, 2014.

Year: 2014 | SJR: Q2

Abdollahnejad Z., Pacheco-Torgal, F., and Aguiar, J. B., "Compressive Strength and Microstructure of Hybrid Alkaline Cements", International Journal of Civil, Architectural Science and Engineering, vol. 8, issue 2, pp. 221-227, 2014.

Ding Y., Ning X., Zhang Y., Pacheco-Torgal, F., and Aguiar, J. B., "Fibres for enhancing of the bond capacity between GFRP rebar and concrete", Construction and Building Materials, Elsevier B.V., vol. 51, pp. 303-312, 2014.

Year: 2014 | JCR: Q1 | SJR: Q1

Cunha P., Aguiar, J. B., and Oliveira P., "Using conformity control of concrete compressive strength for construction site classification", Bulletin of the Polytechnic Institute of Jassy - Constructions. Architecture Section, “Gheorghe Asachi” Technical University of Jassy, vol. Vol. 63, issue 5, pp. 155-169, 2013.

Tahri W., Samet B., Pacheco-Torgal, F., Aguiar, J. B., Jesus C., and s. Baklouti, "Shrinkage and mechanical performance of geopolymeric mortars based on calcined Tunisian clay", JCMR - Journal of Chemistry and Materials Research, vol. 4, pp. 6-11, 2013.

Cunha S., Lucas S., Aguiar, J. B., Ferreira V. M., and Bragança, L., "Influence of incorporation phase change materials, PCM, granulates on workability, mechanical strength and aesthetical appearance of lime and gypsum mortars", ACEE - Architecture Civil Engineering Environment, vol. 6, pp. 39-48, 2013.

Cunha P. J. P., Aguiar, J. B., Oliveira P., and Camões A., "Using Conformity Control of Concrete Compressive Strength for Construction Site Classification", Bulletin of the Polytechnic Institute of Jassy - Constructions. Architecture Section, LIX (LXIII), vol. 5, pp. 155-170, 2013.

Aguiar, J. B., and Júnior C., "Carbonation of surface protected concrete", Construction and Building Materials, vol. 49, pp. 478–483, 2013.

Year: 2013 | JCR: Q1 | SJR: Q1

Vasconcelos E., Fernandes S. A. F., Aguiar, J. B., and Pacheco-Torgal, F., "Concrete retrofitting using CFRP and geopolymer mortars", Materials Science Forum, vol. 730-732, pp. 427–432, 2013.

Year: 2013 | JCR: SQ | SJR: Q3

Lucas S. S., Ferreira V. M., and Aguiar, J. B., "Incorporation of titanium dioxide nanoparticles in mortars – influence of microstructure in the hardened state properties and photocatalytic activity", Cement and Concrete Research, vol. 43, pp. 112–120, 2013.

Year: 2013 | JCR: Q1 | SJR: Q1

Cunha S., Aguiar, J. B., Ferreira V. M., and Tadeu A., "Influence of adding encapsulated phase change materials in aerial lime based mortars", Advanced Materials Research, vol. 687, pp. 255–261, 2013.

Year: 2013 | SJR: Q3

Lucas S. S., Ferreira V. M., and Aguiar, J. B., "Latent heat storage in PCM containing mortars - study of microstructural modifications", Energy and Buildings, vol. 66, pp. 724–731, 2013.

Year: 2013 | JCR: Q1 | SJR: Q1

Ion I. M., Stanciu D., Aguiar, J. B., and Angelescu N., "Polymer concrete, correlations between properties", Metalurgia International, vol. 18, no. 5, pp. 236–239, 2013.

Year: 2013 | JCR: SQ | SJR: Q3

Ion I. M., Aguiar, J. B., Angelescu N., and Stanciu D., "Properties of polymer modified concrete in fresh and hardened state", Advanced Materials Research, vol. 687, pp. 204–212, 2013.

Year: 2013 | SJR: Q3

Aguiar, J. B., Ozkul H. M., and Cunha S., "Report from 13th ICPIC and 7th ASPIC: new trends on concrete-polymer composites", Advanced Materials Research, vol. 687, pp. 45–56, 2013.

Year: 2013 | SJR: Q3

Stanciu D., Ion I. M., Aguiar, J. B., and Angelescu N., "Self-compacting concrete: a comparison between the workability properties, density, porosity and mechanical properties", Metalurgia International, vol. 18, no. 3, pp. 138–141, 2013.

Year: 2013 | JCR: SQ | SJR: Q3

Cunha S., Aguiar, J. B., Kheradmand M., Bragança, L., and Ferreira V. M., "Thermal mortars with incorporation of PCM microcapsules", Restoration of Buildings and Monuments - An International Journal, vol. 19, no. 2/3, pp. 171–177, 2013.

Azevedo F. A. A., Pacheco-Torgal, F., Jesus C. M. G., Aguiar, J. B., and Camões A., "Properties and durability of HPC with tyre rubber wastes", Construction and Building Materials, vol. 34, pp. 186–191, 2012.

Year: 2012 | JCR: Q1 | SJR: Q1

Ding Y., Azevedo C. M., Aguiar, J. B., and Jalali S., "Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature", Construction and Building Materials, vol. 26, no. 1, pp. 21–31, 2012.

Year: 2012 | JCR: Q1 | SJR: Q1

Cunha S., Alves V. H., Aguiar, J. B., and Ferreira V. S., "Use of phase change materials microcapsules in aerial lime and gypsum mortars", Cement, Wapno, Beton, no. Special Issue, pp. 17–21, 2012.

Year: 2012 | JCR: Q4 | SJR: Q3

Vasconcelos E., Fernandes S. A. F., Aguiar, J. B., and Pacheco-Torgal, F., "Concrete retrofitting using metakaolin geopolymer mortars and CFRP", Construction and Building Materials, vol. 25, no. 8, pp. 3213–3221, 2011.

Year: 2011 | JCR: Q1 | SJR: Q1

Pereira D. A., Almeida M. F., Labrincha J. A., Aguiar, J. B., and Castro F., "Argamassas de cimento portland com incorporação de <<óxido secundário>> aluminífero", Ciência & Tecnologia dos Materiais, no. 1, pp. 35–41, 2010.

Angelescu N., Aguiar, J. B., Surugiu G., and Paunescu L., "Considerations regarding the possibility of heat losses reducing through furnaces lining in accordance with actual trends of refractory lining structure optimization", Metalurgia International, vol. 15, no. 12, pp. 23–28, 2010.

Year: 2010 | JCR: Q4 | SJR: Q3

Lucas S., Senff L., Ferreira V. M., Aguiar, J. B., and Labrincha J. A., "Fresh state characterization of lime mortars with PCM additions", Applied Rheology, vol. 20, no. 6, pp. 63162-1–63162-7, 2010.

Aguiar, J. B., and Camões A., "Service life of concrete structures rehabilitated with polymers", Restoration of Buildings and Monuments - An International Journal, vol. 16, no. 4/5, pp. 261–272, 2010.

Vasconcelos E. L. C., Aguiar, J. B., and Pacheco-Torgal, F., "Utilização de argamassas geopolíméricas em alternativa às resinas epoxídicas na reabilitação de betão com CFRP", Engenharia Civil: Revista do Departamento de Engenharia Civil da Universidade do Minho, no. 38, pp. 35–44, 2010.

About CTAC

The Centre for Territory, Environment and Construction (CTAC) is a research unit of the School of Engineering of University of Minho (UMinho), recognised by the “FCT – Fundação para a Ciência e Tecnologia” (Foundation for Science and Technology), associated to the Department of Civil Engineering (DEC), with whom it shares resources and namely human resources.

Currently CTAC aggregates 25 researchers holding a PhD of which 20 are faculty professors of the Civil Engineering Department. Read more

Watch the CTAC Institutional Video

Journal

Research Areas of Competence

Construction Materials and Technologies

Hydraulics and Environment

Territory

News

Contact us

Centro de Território, Ambiente e Construção
Escola de Engenharia da Universidade do Minho
Campus de Azurém
4800-058 Guimarães, Portugal

Phone: + 351 253 510 200 (517 206)
Fax: + 351 253 510 217

Email: geral@ctac.uminho.pt